English 
Views: 0 Author: Site Editor Publish Time: 2022-08-25 Origin: Site
The solar charge controller mainly controls the photovoltaic panel to charge the battery. In this article, the solar charge controller will be introduced to a certain extent, and I hope it will be helpful to you.
Installation and precautions of solar charge controller.
All the company's solar charge controller products.
1. Open the package and fix the solar charge controller in a suitable place (please avoid direct sunlight and humid places).
2. First connect the battery lead (in order to prevent errors in the automatic identification function), and wait for the solar charge controller to complete the identification process (after the level indicator indicates the battery power), then connect the solar panel lead, and finally turn off the load. Connect the load line when disconnected.
3. In order to use safety, do not use excessive load or increase the solar panel too large; use a power supply such as a power supply to replace the solar battery to charge the battery.
4. When the solar charge controller is charging, remove the solar panel, and the charging current should not be too large.
5. Pay attention to the positive and negative poles of the solar charge controller battery.
1. The solar charge controller load does not work
(1) During the day, the controller has light control.
(2) The power in the battery is insufficient.
(3) Whether the wiring is correct.
(4) Remove all wires, repeat the above installation process, and let the controller re-identify.
2. The solar charge controller can be used for a few days but will not work after a few days
(1) The solar cell wiring is incorrect.
(2) The solar cell is not connected properly.
3. The solar charge controller cannot be controlled by light
(1) The solar cell wiring is incorrect.
(2) This function is not set, please reset it.
4. The solar charge controller works as soon as it is turned on, and it cannot be controlled by light or time.
(1) This function is not set, please reset it.
(2) The ambient light of the solar panel is strong enough.
5. The work indicator of the solar charge controller flashes non-stop
The load is short-circuited or the load is too large.
Foshan SNAT Energy Electric Technology Co., Ltd. was established in 2004. It uses solar energy as the main energy source and adopts high-efficiency fifth IGBT technology. It has low operating costs, one-time investment, and long-term benefits. The company's main products are: solar generators, solar inverters, solar charge controllers and other solar products. For example, solar charge controllers include CM-MPPT high-voltage solar charge controllers, CM-MPPT solar charge controllers, CP-wall-mounted solar charge controllers, and SCP-PWM solar charge controllers.
If you are interested in our company’s solar charge controller, you can get in touch with us to communicate, we will provide you with the best solar charge controller products and services. I wish you success in your work and good health.
