Size: | |
---|---|
Packge size: | |
Charge current: | |
Battery capacity: | |
Power: | |
Maximum output power: | |
Availability: | |
DL-10W
SNADI
1.SCM intelligent control and optimization SOC algorithm;
2.Built-in temperature sensor which can improve charge efficiency of the built-in battery effectivelyFull-automatic control such as overcharge protection, overdischarge protection, electronic circuit short circuit protection, overload protection and unique reverse connection prevention;
3.A serial-connection PWM charge main circuit which makes voltage loss of the charge circuit less than that of the charge circuit of a diode by nearly half and the charge efficiency 3% to 6% higher than a non-PWM charge main circuit and increases the time of power consumption;
4.A longer life contributed by automatic control modes including boosting charge for recovery from overdischarge, normal direct charge and floating charge; Visualized display of the system status by nixie tube and LEDs.
Mode:DL | 7AH | 12AH | 24AH | 50AH | 100AH | |
solar panel | Monocrystalline dilicon or polycrystalline silicon panel of class A | |||||
Rated power | 10W | 20W | 30W | 50W | 100W | |
solar panel dimensions | 96*136*193 | 126*156*193 | 163*244*234 | 176*279*288 | 213*300*383 | |
battery tpye | Deep -cycle maintenance -free lead -acid battery | |||||
Batterycapacity | 12V/7AH 12V/12AH | 12V/24AH 50AH | 100AH | |||
Controller | solar mode | Efficient PWM | ||||
Charge current | 5A/12V 10A/12V | |||||
protection function | overcharge protection,overdischarge protection, electronic circuit short circuit protection,overload protection | |||||
Voltage of overcharge protection | 14.3v | |||||
voltage of boosting charge | 14.0v | |||||
Voltage of floating charge | 13.8V;×2/24V;×4/48V;×8/96V; | |||||
Display of nixie tube | Current voltage of the battery | |||||
voltage of overdischarge protection | 10.5v | |||||
indication of LEDs | charge indication ,load indiction ,and battery indication | |||||
DC output | maximum output power | 60W(12V/5A) 120W (12V 10A) | ||||
DC12v | 2 Output port 4 output port 5 output port 6 output port | |||||
DC5VUSB | 1USB output port (MAX.2A) 2USB output port(MAX .3A) | |||||
accessories included | 12VDC LED indicator | A 3w LED and a 5W LED(inculding 2 lamp holders ,a 3M lamp wire and a 5w lamp wire | TWO 3w LEDs and two 5W LEDs (including 4 lamp holders , two 3m amp wires and two 5w lamp wire ) | |||
USB charge line | A universal charge line | |||||
solar panel bracket | A set (including 2 pieces) | |||||
electric wire of the solar panel | 5M | |||||
AC charge | An optional accessory when there is no solar power supply and charging by mains supply |
FAQ:
Q1: What is your minimum quanlity order?
A: One set.
Q2: Are you trading company or manufacturer ?
A:We are a manufacturer in China. We have own factory in Foshan.
Q3: What is your term of payment?
A: 30% TT for deposit, balance before the shipping.
Q4:Can you supply the sample?
A: Yes. we can supply the sample order for testing .
Q5: When you can delivery the goods?
A: Sample order 3-5 days ,mass order usually 15-25 days according to the quantity.
Q6: Is this instalation easy?
A: Yes , We will provide install drawing and user manual ,and you can make a video call to get technical support.
Q7: Can you customized it for us?
A: Yes ,we can customize the logo ,color ,size ...
1.SCM intelligent control and optimization SOC algorithm;
2.Built-in temperature sensor which can improve charge efficiency of the built-in battery effectivelyFull-automatic control such as overcharge protection, overdischarge protection, electronic circuit short circuit protection, overload protection and unique reverse connection prevention;
3.A serial-connection PWM charge main circuit which makes voltage loss of the charge circuit less than that of the charge circuit of a diode by nearly half and the charge efficiency 3% to 6% higher than a non-PWM charge main circuit and increases the time of power consumption;
4.A longer life contributed by automatic control modes including boosting charge for recovery from overdischarge, normal direct charge and floating charge; Visualized display of the system status by nixie tube and LEDs.
Mode:DL | 7AH | 12AH | 24AH | 50AH | 100AH | |
solar panel | Monocrystalline dilicon or polycrystalline silicon panel of class A | |||||
Rated power | 10W | 20W | 30W | 50W | 100W | |
solar panel dimensions | 96*136*193 | 126*156*193 | 163*244*234 | 176*279*288 | 213*300*383 | |
battery tpye | Deep -cycle maintenance -free lead -acid battery | |||||
Batterycapacity | 12V/7AH 12V/12AH | 12V/24AH 50AH | 100AH | |||
Controller | solar mode | Efficient PWM | ||||
Charge current | 5A/12V 10A/12V | |||||
protection function | overcharge protection,overdischarge protection, electronic circuit short circuit protection,overload protection | |||||
Voltage of overcharge protection | 14.3v | |||||
voltage of boosting charge | 14.0v | |||||
Voltage of floating charge | 13.8V;×2/24V;×4/48V;×8/96V; | |||||
Display of nixie tube | Current voltage of the battery | |||||
voltage of overdischarge protection | 10.5v | |||||
indication of LEDs | charge indication ,load indiction ,and battery indication | |||||
DC output | maximum output power | 60W(12V/5A) 120W (12V 10A) | ||||
DC12v | 2 Output port 4 output port 5 output port 6 output port | |||||
DC5VUSB | 1USB output port (MAX.2A) 2USB output port(MAX .3A) | |||||
accessories included | 12VDC LED indicator | A 3w LED and a 5W LED(inculding 2 lamp holders ,a 3M lamp wire and a 5w lamp wire | TWO 3w LEDs and two 5W LEDs (including 4 lamp holders , two 3m amp wires and two 5w lamp wire ) | |||
USB charge line | A universal charge line | |||||
solar panel bracket | A set (including 2 pieces) | |||||
electric wire of the solar panel | 5M | |||||
AC charge | An optional accessory when there is no solar power supply and charging by mains supply |
FAQ:
Q1: What is your minimum quanlity order?
A: One set.
Q2: Are you trading company or manufacturer ?
A:We are a manufacturer in China. We have own factory in Foshan.
Q3: What is your term of payment?
A: 30% TT for deposit, balance before the shipping.
Q4:Can you supply the sample?
A: Yes. we can supply the sample order for testing .
Q5: When you can delivery the goods?
A: Sample order 3-5 days ,mass order usually 15-25 days according to the quantity.
Q6: Is this instalation easy?
A: Yes , We will provide install drawing and user manual ,and you can make a video call to get technical support.
Q7: Can you customized it for us?
A: Yes ,we can customize the logo ,color ,size ...